Important Safety Recall

LouisvilleLadders – Certain Type IA, Type I and Type II “D” Rung and Fiberglass Extension Ladders

The fly section on the ladder may bind without locking.  The following Louisville/Davidson ladders are affected:

534-XX (24’ – 40”)         FE3224-E03                   FE3228-E03E34

574-XX (24’ – 32’)          FE3224-E08                   FE3232

578-XX (28’ and 32’)     FE3224-LO32                FE3232-E03

618-XX (24’ and 28’)     FE3228                         FE3236

FE1724                         FE3228-010002 FE3240

FE1728                         FE3228-740037 L-3022-XXPT (24’ – 32’)

FE3224                         FE3228-E03                   L-3121-24

(On the ladder, the “XX” will identify a particular model size).  Only ladders with manufacture dates/date codes of September 2007 and October 2007 are affected.

Ladders manufactured during September 2007 and October 2007 but with two green dots near the bottom of the left side base rail have already been inspected or repaired and are not affected.

The can be located on the Model Number Label Location and it is located:

– Left hand side rail of base section.

– Model Number at top of label.

– Date of manufacture at two possible locations: 1) Middle of Label or 2) On separate label at bottom of left side rail. If no date given, look at label at bottom of left side rail

If your ladder is affected, STOP USING IT IMMEDIATELY, and call Louisville Ladder toll free at 1-800-660-4356 between 8:00 a.m. and 5:00 p.m., Eastern Time, Monday through Friday, or at www.louisvilleladder.com for information on how to inspect and receive compensation if necessary. Recall done in cooperation with U.S. Consumer Product Safety Commission Post Until [120 days]

MichiganLadder – Certain Type IA, Type I and Type II “D” Rung Fiberglass Extension Ladders

The fly section on the ladder may bind without locking. The following Michigan ladders are affected:

386124 386128 386132 386136 386140

(On the ladder, the “XX” will identify a particular model size). Only ladders with manufacture dates/date codes September 2007 and October 2007 are affected.

The can be located on the Model Number Label Location and it is located:

– Left hand side rail

– Model Number above OSHA stamp

– Date of Manufacture is punched out on separate label under bar code.

Ladders manufactured during September 2007 and October 2007 but with two green dots near the bottom of the left side base rail have already been inspected or repaired and are not affected.

If your ladder is affected, STOP USING IT IMMEDIATELY, and call Louisville Ladder toll free at 1-800-660-4356 between 8:00 a.m. and 5:00 p.m., Eastern Time, Monday through Friday, or at www.louisvilleladder.com for information on how to inspect and receive compensation if necessary. Recall done in cooperation with U.S. Consumer Product Safety Commission Post Until [120 days]

Share and Follow: